*THIS LISTING IS FOR 3D PRINTING FILES ONLY*
 
This is a model I made of Star Wars aesthetic Macro-binoculars. I left certain areas open to allow for user installed LED lighting to give it a real prop effect. Can easily be filled with sintra or similar material if desired. I include both a solid eye-tube and a slotted one. Note the picture of the eyetube with the slot - I include a precut disc with engraving to give you an idea of another option you can do with this - I am a fan of edge-lighting acrylic and translucent PLA with LED's to give a futuristic flair to props. You can install led strips around the eye tube, shining into the slot where the acrylic [you may have to cut your own, the template for size is provided] slides into. The idea is, you can engrave difference designs into the acrylic either with a Cricut machine or with a careful hand and engraving tool. The LED light waves will light up the engraved area as you look through the eyepiece. Just a cool option I thought I would include with the set for those who like the go the extra mile.
 
The side faux switch plate fits into a square slot that is cut to allow a real rocker switch for those who want to install and use it to power on/off their LED's. The switch in question can be found here: https://www.grainger.com/product/10C584?gclid=Cj0KCQjwudb3BRC9ARIsAEa-vUuDAvKI3PMt1Kc0T5RMT6mVSVKfexaipOuYsqOGcIPB6N71WazwDEYaAilzEALw_wcB&cm_mmc=PPC:+Google+PLA&ef_id=Cj0KCQjwudb3BRC9ARIsAEa-vUuDAvKI3PMt1Kc0T5RMT6mVSVKfexaipOuYsqOGcIPB6N71WazwDEYaAilzEALw_wcB:G:s&s_kwcid=AL!2966!3!281698275264!!!g!470148536790!
 
The tubes slide into the macro bino body, and end caps are meant to be installed with hot glue or epoxy. The focal access plate installs with 1/8" screws [of your choice] and has holes predrilled for them. You can also install clear acrylic discs on both ends of the eye tube - user optional. The caps are designed to allow for a 1/8" gap if discs are installed.
 
There are two slots on the side closest to the eyepieces that have .8" slots modeled into the corners to allow for a 3/4" nylon strap to slip into, for those wanting a way to strap these up.
 
The top part of the bino's has a raised section that is hollowed out and is able to accept a red laser epoxied inside to shine through the opening of the greeblie. Another option for electronic-minded builders.
 
Biggest file dimension: 8.03" x 3.5" x 6.45"
 
Please do not share files without explicit consent of Warlord Arsenal. They are for personal use only, no one is allowed to sell physical 3D prints of these or make casts of these. Thank you.