*BLASTER PROP - NON FUNCTIONAL*
*THIS LISTING IS FOR 3D PRINTING FILES ONLY*

Thank you for purchasing 'Westar 36' blaster design by Warlord Arsenal! 
 
Inspired by the real life tactical versions of the 2011 design used in the making of the live action Westar 35's, these are customized variants of what in universe tactical version would maybe look like based off the 35 platform. There are 3 main lengths, a compact version slightly under the size of the live action variant, the classic as seen in the TV series, and a carbine length version inspired from the clone wars versions. There are two "slide" options, a clean one and one with "iron sights" for each length, and two lower options for the compact and classic. Each length can use the three different barrels, and each variant can use one of the four grip base options - all are hollowed to accept CR2032 battery boxes for LED power and will install using a 3mm brass insert and screw if you want these to be removable. The working trigger is inspired from other similar examples popularized by other 3D artists using two pencil springs that allow the trigger to depress a momentary push switch that can be epoxied on the backside of the "trigger box." This will activate a LED that can be installed in the barrel every time the trigger is depressed. My own version works exactly like this flawlessly.
 
For more customizable options, a stock can be epoxied to the backside of any grip module, replacing the backplate and backstrap and a foregrip can be epoxied into the forward area of the classic and carbine grip modules. There are three sight options that can be either epoxied on in the case of the "holosight" or two scope options that have scope rings which can tighten against the grooves of the slide to allow for removability using screws. The holosight has an included .svg file for laser cutting options, and a stl file for resin printing translucent material.
 
Complete the install of the trigger box before sliding the assembly into the grooved channel of the grip module, depressing the trigger to clear the slot. Once installed, it can be removed if needed but this will be tricky so ensure the trigger box assembly is good to go before installing.
 
List of materials required for assembly:
1/4" Dowel Rod
M3 brass insert and M3 x 10mm socket cap screw [for base install]
3mm OD x 12mm compressed x 20mm free length pencil springs [x2 for working trigger]
.2" or smaller screws for scope rings
2 part epoxy or glue of choice
 
For electronics:
Momentary push switch for trigger LED throw [https://www.amazon.com/dp/B08L7P2X8L?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1]
3mm prewired LED of choice
CR2032 dual battery box [https://www.amazon.com/dp/B07BXDHT4B?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2]
 
Thank you for viewing!
 
Please do not share files without explicit consent of Warlord Arsenal. They are for personal use only, no one is allowed to sell physical 3D prints of these or make casts of these. Thank you.